Why Buy Miresa


  • It's automatic.
  • It's wireless.
  • No more manual monthly and annual emergency light tests to meet your legal obligations as an employer or building owner.
  • Automatic record keeping of every emergency light test.
  • Guarantee the safety of your staff and customers should the worst happen and an emergency evacuation is required.
  • Relax knowing that the emergency lighting in your building is fully functional and there are the records to prove it.
  • Almost no extra installation cost over conventional emergency lights.
  • No need for specialist IT skills or IT department involvement.
  • Unlike other systems the only additional wiring required is a mains supply for the Control Panel.


The system pays for itself in terms of labour and time for the manual monthly and annual checks.


  • There is no need for anyone to even look at the Control Panel unless the system finds a faulty emergency light and starts beeping. Even then the system tells you which emergency light is faulty and what is wrong with it.


If your existing emergency lights have tired batteries and/or fluorescent tubes then fit a Miresa system and save money.


Don't just take our word for it, here's an article in Lux Review on why you should have automatically tested emergency lights:  Lux Review - Why you should consider automatic testing for emergency lighting


And here's what can happen if you don't test your lights or have a system like Miresa: Lux Review - Here's a guy who wishes he'd looked after his emergency lighting


Some examples of the cost savings over 3 years


Building with 5 emergency lights


Additional cost to install the system
£450 + (£60 x 5) 
£750
Monthly engineer visit, test, record keeping
33 months x (£50 + £50)
£3300
Annual engineer visit, 3 hour test, record keeping, report
3 annual x (£50 + £150)
£600
Savings over 3 years

£3150


Building with 10 emergency lights


Additional cost to install the system
£450 + (£60 x 10) 
£1050
Monthly engineer visit, test, record keeping
33 months x (£50 + £50)
£3300
Annual engineer visit, 3 hour test, record keeping, report
3 annual x (£50 + £150)
£600
Savings over 3 years

£2850


Building with 100 emergency lights


Additional cost to install the system
£450 + (£60 x 100) 
£6450
Monthly engineer visit, test, record keeping
33 months x (£50 + £200)
£8250
Annual engineer visit, 3 hour test, record keeping, report
3 annual x (£50 + £500)
£1650
Savings over 3 years

£3450


Installation costs are a Miresa Control Panel and the additional cost of Miresa LED emergency lights over conventional emergency lights.


Labour costs are £50 for a site visit and £50 per hour (actually costs will vary significantly dependent on contractor, location and building layout).


Once installed the savings continue with a computer doing the work rather than a person.


On small systems you're saving money in less than 12 months.


There are no products to list in this category.